Original Cutters And Carbide Insert Shapes From Iscar To Better Enhance The Machining Process

Iscar is introducing Penta 34 carbide inserts by having a new PB chipformer. The PB chipformer features a single cavity utilizing a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a dissimilar frontal edge.

The completely new chipformer was fashioned for machining soft materials. It is an fantastic solution for parting bearing steel and other very ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.

The combination of the completely new chipformer and IC908 grade provides excellent chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the versatile IC908 PVD coated grade. The revolutionary family extends the application range of Iscar's most practical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when stacked up against to a competitor's tool, is a winning solution for machining several soft and ductile material.

Iscar's Upgrades for Parting

Iscar has developed a new family of reinforced Tang-Grip blades for the popular TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced fabrication, can be used in long overhang. Only the part of the blade required for penetration (cutting depth) has a reduced width. The remainder is thick, which provides enhanced rigidity and stiffness. These blades are an amazing solution for parting and grooving between the main and sub-spindle of turn/mill machines. The single-ended insert has a exceptionally rigid clamping and therefore provides a very substantial advantage over any other system.

Further additions to Iscar's Grip family are Do-Grip carbide inserts manufactured from the new Sumo Tec carbide grades: IC807 IC808 and IC830. The brand new Sumo Tec grades notably lengthen insert life, due to the most advanced coating technology followed by a special surface treatment. This also provides upgraded tool life due to low surface stress and an evenly coated top surface. The level surface contributes to smooth uninterrupted chip flow, less generated heat and less friction. The new process refines toughness and chipping resistance and thus diminishes friction and built-up edge. This in turn enhances and prolongs tool life at increased machining conditions for all types of work piece materials. The new PVD process is made of Iscar's AL-TEC coating technology, utilizing the unique surface treatment.

Iscar's Chip Splitting Inserts
Iscar's new HM90 APCR 220605-CS grooved carbide inserts put an end to chip crowding problems in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts tailored specially for aluminum milling. With 2 grooves pressed into each polished cutting face, the inserts split aluminum chips into a manageable size for easy, dependable evacuation despite the application's characteristic high chip volume. The 22 mm inserts, each with two edges, are designed to expand metal removal over the full range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work especially well with Iscar's completely new HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and decrease chatter in long-overhang setups. The inserts feature a cavity on the bottom to ensure correct mounting in cutter chip pockets outfitted with standard spring pins. For optimum chip control, Iscar endorses using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.

A Couple Of The Several Advancements In Carbide Inserts Coming From Iscar From Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Iscar Offers A Brand New Line Of Slitting Cutters Using Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Adds Their Most Recent Creations To A Long Line Of Prospering Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Many Developments Have Expanded Iscar's Line Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Some Of Advancements In Carbide Inserts Provided By Iscar Over The Past Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Completely New End Mills From Iscar Can Boost Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Push Pull Testing For Building Industry Supplying Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Absolutely New Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

The Truth About The Graduate Professions Available In Europe.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.

Getting An Automotive Engineering Job Today.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.