New Creative Tool Holders From Iscar Lead The Way In Machining Efficiency

Iscar's Heliturn system features a unique, double-sided insert with 4 cutting edges for Fast Metal Removal (FMR) turning. The cutting edge Heliturn is a tangentially clamped insert having a distinctive helical shaped cutting edge, useful for immense depths of cut and higher than typical feed rate. The LNMX...-HT Heliturn insert is screw-clamped into the SLANR tool holder and held by the TLN ..-HT carbide seat. This seat has ground surfaces on the top and bottom, to insure perfect contact of the insert with the tool holders. The upper rake face of the insert is mounted level with the top of the tool holder to enable chips to flow across the insert, without being interfered by clamps or the tool holder body. The 4 curved helical cutting edges provide positive radial rake angles and soft penetration into the material being cut. The decreased forces and smaller loads ensure better tool longevity, considerably more stability and the ability to use exceptionally tremendous depths of cut and higher feeds. The chipformer, manipulates and breaks the chip into rib type curved fragments which can conveniently be removed from the cutting area. The insert has a frontal clearance angle of 3.7 with a 6 side clearance angle to allow machining to a 90 shoulder. Depth of cut up to .315" and facing depths to .126" at up to .047" IPR are attainable with Heliturn.

When assimilated to CNMG/M 16... or WNMG/M 13... insert sizes with the identical corner radius, much better tool life can be foreseeable when using the LNMX 1506..-HT insert. Iscar has recently released a smaller size to the Heliturn family - the LNMX 1104..R/L-HT insert and tool holder for the medium application range of up to .197" depth of cut. The new insert features all of the blessings of the larger insert. This enhances the economical benefit in the medium machining application extent. When compared to CNMG/M 43. 12... or WNMG/M 43. 08... insert sizes with the same corner radius, a much better tool life can be foreseen. The inserts are offered in .031, .047 and .063" tool nose radii. Heliturn inserts are presented in the most superior carbide grades: IC9025, IC3028 , IC428, IC907, and IC908.

The external tool holders are available in 1, 1.25 and 1.5" shank sizes. Boring bars are obtainable in 1, 1.25 1.5 and 2" bar sizes. Also obtainable are exchangeable heads. These tool holders have Iscar's unique Hard Touch coating, which enhances/increases/expands/heightens/stretches holder life and thwarts corrosion. As a result of the positioning of this insert, machining next to the tailstock is likely.

The high positive rake angle of these cutters allows 10-15% less power usage than traditional tool holders at the same parameters.

By using Iscar's Heliturn tools, enormous cost savings and profitability in lathe procedures is assured.

A Unique 80 Degree Rhombic Insert with high helical cutting edge for high metal removal rates Iscar is introducing the CNMX 1207..-HTW insert family. The unique insert has a very positive radial, helical cutting edge and a positive rake angle; a blending which considerably reduces the cutting forces. The insert's corner has a wiper configuration which supplies high surface finish even at high feed conditions, which in numerous occasions can relinquish a finishing cut. The corner angle is 88 degrees which provides expanded strength. The CNMX inserts were designed for heavy machining applications. Their specific design ensures reputable, fast metal removal when using 80 degree rhombic inserts. They can be mounted on any regular tool holder that carries regular CNMG inserts, but the seat has to be replaced with a special seat: TCH 4. Iscar's R-clamp tool holders are highly endorsed for heavy machining applications.

Saving You Hardware Problems And Lots Of Cash: Acquiring The Ideal Cordless Drill
Whether you're an avid craftsman or an amateur just looking to fix things around the house, to buy a cordless drill can be a daunting task.

Easy Methods To Use A Concrete Cut Off Saw By Using The Diamond Saw Blade
Are you looking for a multipurpose tool that will do a lot of jobs around the house or job site? A concrete cut off saw will cut more than you think.

Megger Tester - The Standard Of The Industry
Every field of business has a company that not only helps set the standards for the industry, but leads it in a remarkable way. These companies are always innovative, and have established themselves as an expert that others look up to and strive to be like.

Buying A Megger Tester: Most Excellent Methods
A Megger tester is a device that is commonly used in electrical contracting to determine if the system has been properly installed.

Woodworking Made Easier With Grizzly Equipments
Woodworking is a craft that requires adequate skill and creativity. The skill of a woodworker is translated to the wood with the use of appropriate wood carving tools. One brand that is popular among Northern Tools customers is Grizzly Woodworking tools.

Some Common Machinist Tools That You May Need To Accomplish Your Machining Projects
When it comes to buying your own tools, things can get a bit confusing, especially if you are an at home or paid machinist. Buying complicated tools that may be hard to find is often a challenge.

Learn About What Metal Stamping Tools Are Needed To Create Customized Stamped Jewelry
Using metal stamping tools to create jewelry is a popular trend these days. It is relatively easy to create personalized jewelry using just a few tools.