Iscar Adds Their Most Recent Creations To A Long Line Of Prospering Hole Generating Solutions

Iscar recently released numerous different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their expertise Iscar has come up with brand new and innovative ways to enhance productivity for the end user. Here is a little bit about these cutting edge products, and how they will serve the end user of these products.

SUMOCHAM Drills

ISCAR's new SUMOCHAM drill family is an advanced development of the tremendously successful CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for a variety of material groups. SUMOCHAM drills can be used on milling centers or lathes.

SUMOCHAM incorporates four different standard drill head geometries, designed for unsurpassed performance and high reliability. The drill head is constructed with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are offered in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, uninterrupted chip flow and a ground gash for improved penetration.

The drill shank design is according to DIN 9766 standard, with available drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies showcase coolant through holes. The accurate cylinder added to the clamping portion increases durability and reduces internal stresses. The rotation stopper planes are precisely ground, to improve the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will furnish longer tool life and higher productivity.

DR-DH Deep Drills

DR-DH drills can obtain drilling depth-to-diameter ratio of 7XD and up. Constructed to be implemented on standard horizontal milling centers, turning, and multi-task machines. Use of supplemental machine and setup can be avoided. They will be available as semi-standard product in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").

Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very stiff tool with a patented chip gullet design. It was engineered for easily cut materials like cast iron and low alloyed steel.

A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for improved chip flow. It was tailored for drilling gummy materials like non-alloyed steel and high temperature alloys.

ISCAR DEEP HOLE DRILLS

With ISCAR's innovative solid carbide deep hole drills, you can safely drill up to 22 times diameter and attain bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capacity can speed up many high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it fully because a drill breaks.

Different target applications encompass deep holes for automotive, hydraulic blocks and die & mold work. A mixture of features help the twist drills to cut faster, straighter,deeper, last longer and evacuate chips more readily. A special high-strength core creates a more enduring drill point and allows for deeper flutes, enlarging the exit path for chips.

The drill tip itself have a 140 positive-point, four-margin design to maintain the edge, cut down thrust forces and assist centering and tracking. A post-coat polishing method on the flutes, margins and cutting edges decreases friction and torque that can easily snap a drill.

The brand new drills are available in standard diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are attainable on request. All are built of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.

These are just some of the latest innovations coming from Iscar.

Iscar Offers A Brand New Line Of Slitting Cutters Using Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

A Couple Of The Several Advancements In Carbide Inserts Coming From Iscar From Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Original Cutters And Carbide Insert Shapes From Iscar To Better Enhance The Machining Process
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

The Latest In Carbide Endmill Designs In A Lengthy And Successful Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Some Of Advancements In Carbide Inserts Provided By Iscar Over The Past Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Industrial Water Heater - Considering All Of Your Requirements - Read Carefully In Order To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Push Pull Testing For Building Industry Supplying Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.